Mitsubishi MOTORS Colt 2009 Скачать руководство пользователя страница 271

Страница: 271 / 449

5-48

For pleasant driving

You can listen to commercially available audio equipment,
such as a portable audio system, from your vehicle’s speakers,

by connecting the audio equipment to the auxiliary audio con-
nector (1).

NOTE

●

Use a stereo mini-jack connector to connect the audio

equipment to the auxiliary audio connector.

To activate the external audio input mode

1. Connect the headphone port of the portable audio system

to the auxiliary audio connector (1) using a commercially

available connection cord.

2. Press the AUX button (2).

The display (3) will show “AUX” and then the external

audio input mode will be activated.

3. To deactivate the external audio input mode, press the

AUX button (2). To switch to another mode.

NOTE

●

The connected audio equipment cannot be operated with
the vehicle’s audio system.

●

Depending on the connected audio equipment, it may pro-

duce noise from the speakers.

●

Use the connected audio equipment’s own power source,

such as its battery.
Noise may be produced from the speakers if the connected

audio equipment is used while charging it using the acces-

sory socket of the vehicle.

●

Do not activate the external audio input mode when no

audio equipment is connected.

Otherwise, noise may be produced from the speakers.

●

Connect audio equipment when the external audio input

mode is deactivated or lower the vehicle’s speaker volume

before connecting it.
Noise may be produced from the speakers if audio equip-

ment is connected after the external audio input mode is

activated.

●

Compared to the CD player mode and radio mode, the

vehicle’s speaker volume will be lower in the external

audio input mode. Therefore, be careful when switching
from the external audio input mode to the CD player mode

or radio mode since the speaker volume will be higher.

●

Do not use excessive force on the connection cord. Other-
wise, the cord and connectors may be damaged.

●

If the connection cord alone is left connected to the auxil-

iary audio connector, noise may be produced from the
speakers.

●

For information on how to connect and operate the com-

mercially available audio equipment, refer to the owner’s
manual for the commercially available audio equipment.

CAUTION

●

Do not operate the connected audio equipment while
driving.

This could distract you and an accident might occur.

Содержание Colt 2009


































































































































































































































































































































































































































































Результаты поиска

Содержание Colt 2009

Отзывы:

Mitsubishi MOTORS Colt 2009, Руководство пользователя, Страница: 271 / 449

Результаты поиска

Содержание Colt 2009

Отзывы: