Mitsubishi MOTORS Colt 2009 Скачать руководство пользователя страница 152

Страница: 152 / 449

Instruments and controls

3-41

Wiper and washer switch

E00507101191

Windscreen wipers

E00516900127

Except for vehicle with rain sensor

E00527000072

The windscreen wiper and washer can be operated with the

ignition switch in the “ON” or “ACC” position.

If the blades are frozen to the windscreen, do not operate the
wipers until the ice has melted and the blades are freed, other-

wise the wiper motor may be damaged.

CAUTION

●

If the washer is used in cold weather, the washer
fluid sprayed against the glass may freeze, which

may hinder visibility. Warm the glass with the

defroster or rear window demister before using the
washer.

- Misting function

The wipers will operate once.

- Off

--- - Intermittent (speed-sensitive)

1- Slow
2- Fast

Содержание Colt 2009


































































































































































































































































































































































































































































Результаты поиска

Содержание Colt 2009

Отзывы:

Mitsubishi MOTORS Colt 2009, Руководство пользователя, Страница: 152 / 449

Результаты поиска

Содержание Colt 2009

Отзывы: