Mitsubishi MOTORS Colt 2009 Скачать руководство пользователя страница 125

Страница: 125 / 449

3-14

Instruments and controls

Fuel remaining warning display

E00522400215

If the remaining fuel level is approximately 7 liters or less (one

segment displayed) when the ignition switch is turned to the
“ON” position, the last segment of the fuel gauge flashes. If the

remaining fuel level is approximately 4 liters or less (no seg-
ments displayed), “ “ and the bar graph flash.

NOTE

●

On inclines or curves, the display may be incorrect due to
the movement of fuel in the tank.

Service reminder

E00522500388

Displays the approximate time until the next periodic inspec-

tion that MITSUBISHI MOTORS recommends. “---” is dis-

played when the inspection time has arrived.

NOTE

●

Depending on the vehicle specifications, the displayed

time until the next periodic inspection may differ from

that which MITSUBISHI MOTORS recommends.
In addition, the display settings for the next periodic

inspection time can be modified.

To modify the display settings, have it adjusted at a
MITSUBISHI MOTORS Authorized Service Point.

For more details, consult a MITSUBISHI MOTORS

Authorized Service Point.

One segment is displayed

No segments are displayed

Содержание Colt 2009


































































































































































































































































































































































































































































Результаты поиска

Содержание Colt 2009

Отзывы:

Mitsubishi MOTORS Colt 2009, Руководство пользователя, Страница: 125 / 449

Результаты поиска

Содержание Colt 2009

Отзывы: