Mitsubishi MOTORS Colt 2009 Скачать руководство пользователя страница 143 | Manualshive

Страница: 143 / 449

Mitsubishi MOTORS Colt 2009 Скачать руководство пользователя страница 143

3-32

Instruments and controls

3

Type 2

Rotate the switch to turn on the lamps.

NOTE

●

If the front fog lamps (if so equipped) turn on when they
are supposed to with the switch in the “AUTO” position,

the lamps turn off automatically with the engine switch

off.

●

Do not cover the sensor (A) for the automatic on/off con-

trol by affixing a sticker or label to the windscreen. Also,
do not put any water-repellent coating on the windscreen.

●

If the lamps do not turn on or off with the switch in the

“AUTO” position, manually operate the switch and we

recommend you to have your vehicle checked.

[Vehicles with Daytime Running Lamp]

When the ignition switch is in the “ON” position and the lamp
switch is set to the “ ” (OFF) position, the low beam of the
headlamps, tail lamps, etc., will illuminate.

All lamps off

AUTO

With the ignition switch in the “ON” position, head-
lamps, position, tail, licence plate, and instrument panel
lamps turn on and off automatically in accordance with
outside light level. All lamps turn off automatically
when the ignition switch is turned to “OFF” position.
Position, tail, licence plate and instrument panel lamps
on

Headlamps and other lamps go on

«
...
141
142
143
144
145
...
»

Содержание Colt 2009


































































































































































































































































































































































































































































Отзывы:

Нет отзывов