Mitsubishi MOTORS Colt 2009 Скачать руководство пользователя страница 267

Страница: 267 / 449

5-44

For pleasant driving

To repeat a track

Press the RPT/RDM button (10) while the track is playing.
“RPT” will appear on the display. To exit the repeat mode,

repeatedly press the RPT/RDM button until the “RPT” display
disappears.

NOTE

●

The repeat mode will be cancelled by pressing the track

button (11) or eject button (2).

●

With a disc that contains both CD-DA and MP3 files, the
repeat mode causes only files of the same format (CD-DA

only or MP3 files only) to be repeated.

To change the order of tracks for playback

Random playback for a disc (music CDs only)

Press the RPT/RDM button (10) two times. “RDM” will appear

on the display. Tracks on the currently selected disc will be
played in a random sequence.

To exit the random mode, repeatedly press the RPT/RDM but-

ton until the “RDM” display disappears.

Random playback for a folder (MP3 CDs only)

Press the RPT/RDM button (10) two times. “RDM” will appear

on the display. Tracks in the currently selected folder will be
played in a random sequence. To exit the random mode, repeat-

edly press the RPT/RDM button until the “RDM” display dis-

appears.

Random playback for all folders on a disc (MP3 CDs only)

Press the RPT/RDM button (10) three times. “D-RDM” will

appear on the display. Tracks from all the folders on the cur-
rently selected disc will be played in a random sequence. To

exit the random mode, repeatedly press the RPT/RDM button

until the “D-RDM” display disappears.

Содержание Colt 2009


































































































































































































































































































































































































































































Результаты поиска

Содержание Colt 2009

Отзывы:

Mitsubishi MOTORS Colt 2009, Руководство пользователя, Страница: 267 / 449

Результаты поиска

Содержание Colt 2009

Отзывы: