Mitsubishi Electric Q80BD-J71BR11, Руководство пользователя

Страница: 93 / 224

7 - 1 7 - 1
MELSEC
7 PARAMETER SETTINGS
7 PARAMETER SETTINGS
It is necessary to set the MELSECNET/H board's parameters using the MNETH utility
in order to operate the MELSECNET/H.
In setting of the parameters, after the MELSECNET/H is selected, it can be set even to
the details of the application functions.
A flow chart of the settings is shown below.
Network settings
1) Network No.·············1 to 239
2) Station No.···············1 to 64 (Optical loop),
1 to 32 (Coaxial bus)
3) Control station / Normal station settings
Set the following items as necessary.
4) Group No.················1 to 32
Board information settings
1) Channel···············MELSECNET/H (1st board to 4th board)
2) Network type·······MNET/H mode, MNET/H EX mode,
MNET/10 mode
Control station?
No
Set the following functions
as necessary.
Routing parameter setting/transmission
MELSECNET/H board information update
Connection of cables
Not
necessary
Necessary
Yes
Common parameters
1) Transmission range of each station
(LB/LW, LX/LY settings)
2) Total number of link stations
Set the following items as necessary.
3) I/O master station setting
4) Reserved station setting
Supplementary settings
Control station return setting
Transmitting the common parameters to the MELSECNET/
H board.
··········Refer to Section 6.4.
Opposite party setting (when accessing a multiple
CPU system or redundant CPU system)
POINT
When replacing a board, you may need the channel numbers and parameter
settings that were used before the replacement. When reinstalling the software
package, you need to reset the channel numbers and the parameter settings. Be
sure to record channel numbers and parameter settings when you have set
parameters.
7