Mitsubishi Electric Q80BD-J71BR11, Руководство пользователя

Страница: 57 / 224

6 - 1 6 - 1
MELSEC
6 PROCEDURE AND SETTINGS UP TO THE POINT OF OPERATION
6 PROCEDURE AND SETTINGS UP TO THE POINT OF OPERATION
This section explains the operating procedure up to the point the MELSECNET/H
board is operated.
6.1 Procedure Up to the Point of Operation
An outline of the procedure up to the point of MELSECNET/H board operation is
explained below.
Start
Check
↓
Install the software package
□
Install the software package on a personal computer. • • • Section 8.2 Installation
↓
Install the board
Install the board to a slot on the personal computer. • • • Section 6.3.3 Board installation
□
For the board with external power supply function, wire the
external power supply cable. • • • Section 6.4.4 External power
supply cable wiring
↓
Set the channel No. □
Set the channel No. and confirm it with the utility. • • • Section 6.3.4 Channel No. settings
↓
Check the board □
Test the hardware of the installed board. • • • Section 6.5 Test
↓
Wire the cables
□
Wire the network cables for the installed board. • • • Section 6.4 Wiring
↓
Set the parameters □
Set the parameters and confirm them with the utility. • • • Chapter 7 PARAMETER SETTINGS
↓
Check the network □
Test the cable connection and data link on the network. • • • Section 6.5 Test
↓
Execute a user program □
Execute a user program or utility.
↓
Operation
REMARK
It is necessary to perform settings on the control station side in order to use the
MELSECNET/H board as a normal station. Set the control station side as required.
Refer to manuals listed below for the setting on the control station side.
• Q Corresponding MELSECNET/H Network System Reference Manual (PLC to
PLC network)
• For QnA/Q4AR MELSECNET/10 Network System Reference Manual
6