Confirming the operation
2-29
Changing the flange surface posture
* The flange position does not change.
This is the same as the A, B and C axis XYZ jog operation.
• When the [+A (J4)] key is pressed, the axis will rotate around the X axis in the plus direction.
When the [-A (J4)] keys is pressed, rotate in the minus direction.
• When the [+B (J5)] key is pressed, the axis will rotate around the Y axis in the plus direction.
When the [-B (J5)] keys is pressed, rotate in the minus direction.
• When the [+C (J6)] key is pressed, the axis will rotate around the Z axis in the plus direction.
When the [-C (J6)] keys is pressed, rotate in the minus direction.
-
+
X
X
-
Y
+
Y
+
Z
-
Z
+
-
+
-
+
-
+
X
+
Y
+
Z
,
SPACE
Control point
Tool length
