Mitsubishi Electric KD Series, Руководство пользователя

Страница: 81 / 118

© Mitsubishi Electric Corporation
81
[Function]
This function adjusts the different position of each RGB
line into a certain position that scans same area of object.
Set the value of LineAdjustmentRatio according to the ratio
of the resolution in transportation direction.
Example:Reslution in transportation direction 300dpi
LineAdjustmentRatio =300dpi/600dpi
×
4096=2048
[Remark]
1) An unstable transportation speed may cause a color
bleeding or blurring.
2)This function is not to completely control a color bleeding
or blurring. Use the effect of this function after confirmation
enough.
3)When you organize Line adjustment by your system, use
this product as Line adjustment OFF.
4)For more details, please refer to Function Specification.
5-2-16 Line adjustment
Each line of RGB photo-diodes on Sensor IC is
assembled based on 600 dpi as described above.
Line adjustment function creates internal line delay by
using embedded line memory and adjust each line data
position. (at initial setting)
Address Register name R/W Parameter
Data
Function Initial
70C0h
LineAdjustment
Enable
R/W 0 or 1
Set Line adjustment On/Off
0:OFF /1:ON
1
70C4h LineAdjustmentDirection R/W 0 or 1
Set transportation direction
0: Normal (B → G → R
：
B-line first)
1: Opposit (R → G → B
：
R-line first)
0
70C8h LineAdjustmentRatio R/W 1 to 16384
Resolution in transportation direction
／
600dpi Ratio
(0.03 to 4.0)
LineAdjustmentRatio =
Resolution(transportation direction)/600dpi
×
4096
4096
70CCh LineAdjustmentOfset R/W 0 to 4096
Offset setting of Green pixel (0 to 1.0)
ܱ݂݂ݏ݁ݐ =
ܴ݁݃݅ݏݐ݁ݎݒ݈ܽݑ݁
4096
0
42.3um(600dpi)
42.3um
(600dpi)
Transport
direction
5-2 Setting
⑭
: Line Adjustment
TM-XJ959A