Mitsubishi Electric KD Series, Руководство пользователя

Страница: 85 / 118

© Mitsubishi Electric Corporation
5-2-20 Overwrap output
This function enables to add first 144 pixels data@600dpi (6.1mm width of
image ) of a next module on the output of a module.
[Function]
This product have 2 or 3 signal blocks of
Camera Link ® and output image data at
parallel. This product can output image data
from 2 or 3 different signal blocks, which
the image data are overwrapped partially.
This function contribute to acquire the
image data between the multi channels of
Camera Link ® .
By this function, image data near the
connection point can be confirmed correctly
even if using multiple PCs to acquire image.
The number of the added or overwrapped
pixels depend of the output resolution. (The
total overwrapped image data correspond
to the 6.1mm width of the acquired image.)
Number of the added pixels :
144 pixels @600dpi
72 pixels @300dpi
48 pixels @200dpi
36 pixels @150dpi
85
Address Register name R/W Parameter
Data
Function Initial
7120h OverlapEnable R/W 0 or 1
Set Overwrap output(
between the multi signal blocks , and
between the multi channels)
On/Off
0:OFF /1:ON
0
5-2 Setting
⑱
: Overwrap Output
Camera Link® is a trade mark registered by AIA
（
Automated Imaging Association).
KD-DXL CIS
Signal Processing
Board
Ch1:6,048pix +144pix ,
Ch2:6,048pix +144pix (L4)
×
RGB
Ch1:6,912pix +144pix ,
Ch2:6,912pix +144pix (L5/L6)
×
RGB
Ch1:6,408pix +144pix ,
Ch2:6,552pix (L4)
×
RGB
Ch1:7,704pix +144pix ,
Ch2:7,848pix(L5)
×
RGB
Ch1:6,480pix +144pix ,
Ch2:6,480pix +144pix (L6)
×
RGB
Sensor Array
Ch1 Ch2
Ch1 Ch2
Ch1
Ch2
Pixel data between
modules(Signal block)
Ch1:6,408pix +144pix ,
Ch2:6,552pix
(L6)
×
RGB
Pixel data between
channels
TM-XJ959A