4. Setting up MELDASMAGIC64 System
4.3 Setting Up NC Card and Device Driver (ISA Card)
54
4.3.2.4 Initializing NC Card Memory
Initialize the NC Card memory when starting up NC Card for the first time or replacing the battery of
NC Card.
!
CAUTION
All the memory information (such as parameters, machining programs, and ladders) in NC
Card is erased when the memory is initialized. When initializing the memory of the NC Card in
use, be sure to back up the parameters and so on, as needed, prior to initialization.
Initialize the NC Card memory according to the procedures below.
Open the “Settings” page of the NC System Device Driver’s Properties screen, and clear the NC
Card memory.
[Procedures]
(1) Display the "Mitsubishi PC-Based NC MELDASMAGIC64 (HR62xx) Properties" window. For the
method of displaying the window, refer to chapter 4.3.2.3 “Confirming NC System Device Driver
Operation."
Downloaded from
