4. Setting up MELDASMAGIC64 System
4.2 Setting Up NC Card and Device Driver (PCI Card)
20
4.2.1.5 Initializing the NC Card Memory
Initialize the NC Card memory when starting up NC Card for the first time or replacing the battery of
NC Card.
!
CAUTION
All the memory information (such as parameters, machining programs, and ladders) in NC
Card is erased when the memory is initialized. When initializing the memory of the NC Card in
use, be sure to back up the parameters and so on, as needed, prior to initialization.
Initialize the NC Card memory according to the procedures below.
Open the “Settings” page of "Mitsubishi PC-Based NC MELDASMAGIC64 (HR655A) Properties"
screen, and clear the memory of NC Card.
[Procedures]
(1) Display the "Mitsubishi PC-Based NC MELDASMAGIC64 (HR655A) Properties" window. Refer to
chapter 4.2.1.4 “Confirming NC System Device Driver Operation” for more details on displaying.
(2) Click the [Settings] tab, and then click the [Memory Clear] button.
Downloaded from
