4. Setting up MELDASMAGIC64 System
4.2 Setting Up NC Card and Device Driver (PCI Card)
31
4.2.2.5 Initializing the NC Card Memory
Initialize the NC Card memory when you start up NC Card first or replace the battery of NC Card.
!
CAUTION
All the memory information (such as parameters, machining programs, and ladders) in
NC Card is erased when the memory is initialized. When initializing the memory of the NC
Card in use, be sure to back up the parameters and so on, as needed, prior to
initialization.
Initialize the NC Card memory according to the procedures below.
Open the [Settings] page of the "NC System Device Driver’s Properties" screen, and clear the
memory of NC Card.
[Procedures]
(1) Display the "Mitsubishi PC-Based NC MELDASMAGIC64 (HR655A) Properties" window. Refer to
chapter 4.2.2.4 “Confirming NC System Device Driver Operation” for more details on displaying.
Downloaded from
