Mitsubishi Electric CITY MULTI PUMY-P112VKM6, Руководство по обслуживанию

Страница: 124 / 142

OCH790 _124
Fri
Mode Temp. Fan
Room
Cool
Set temp. Auto
2
5
6
7
8
9
10
11
12 14 16
13 15 17
22
3
19
4
20
21
18
Fri
Cool
Mode Temp. Fan
Set temp.
Auto
2
1
5
4
3
24
23
■ Full mode
All icons are displayed for explanation.
■ Basic mode
1
Note:
• Most settings (except ON/OFF, mode, fan speed, temperature) can be made from the main menu.
1. Operation mode
2. Preset temperature
3. Clock
4. Fan speed
5. Button function guide: Functions of the corresponding buttons appear here.
6. : Appears when the ON/OFF operation is centrally controlled.
7. : Appears when the operation mode is centrally controlled.
8. : Appears when the preset temperature is centrally controlled.
9. : Appears when the filter reset function is centrally controlled.
10. : Appears when filter needs maintenance.
11. Room temperature
12. : Appears when the buttons are locked.
13. : Appears when the On/Off timer, Night setback, or Auto-off timer function is enabled.
: Appears when the timer is disabled by the centralized control system.
14. : Appears when the Weekly timer is enabled.
15. : Appears while the units are operated in the energy saving mode.
(Will not appear on some models of indoor units)
16. : Appears while the outdoor units are operated in the silent mode.
17. : Appears when the built-in thermistor on the remote controller is activated to monitor the room temperature (11).
: Appears when the thermistor on the indoor unit is activated to monitor the room temperature.
18. : Indicates the vane setting.
19. : Indicates the louver setting. *1
20. : Indicates the ventilation setting.
21. : Appears when the preset temperature range is restricted.
22. : Appears when an energy saving operation is performed using a ˝3D i-See sensor˝ function. *1
23. Centrally controlled: Appears for a certain period of time when a centrally-controlled item is operated.
24. Preliminary error display: A check code appears during the preliminary error.
*1. These functions are not applied to the floor standing models.
Menu structure
Press the [ ] button.
Move the cursor to the desired item with the F1 and F2 buttons, and press the [ ] button
Note:
• Not all functions are available on all models of indoor units.