E −
7
ENGLISH
Installation
Tolerance on support flatness
≤
1 mm
1 mm or less
Fig. 7-1
< Drawout type >
Fig. 7-2
M8
Earthing terminal
M12
M8
Earthing
terminal
M12
Fig. 7-8
< Fixed type >
Operate the drawout operation (CONNECT position to DRAWOUT position) according to instructions of drawout
operation. (Refer to P.13 and 14.)
Lifting by lifting truck or lifting hooks
Fig. 7-5
Fig. 7-6
CAUTION
Fig. 7-7
Lifting
Falling
O n A E 4 0 0 0 - S W A , A E 4 0 0 0 - S W ~
AE6300-SW, the center of gravity of the
cradle is located at the terminal posi-
tion. When the main body is removed
from the cradle, the cradle may turn over
backward. Take measures against
overturning.
When the main body is drawn out,
the center of gravity shifts to the
front. If the cradle is not secured,
take measures against overturning
and dropping.
CAUTION
AE630-SW〜AE4000-SWA
Fig. 7-3
Fig. 7-4
In the case of AE4000 ~ 6300-SW, insert four M12 bolts from the bottom and two M12 bolts from the back to mount the
cradle as shown in Fig. 7-3. In the case of 4P FN type, insert six M12 bolts from the bottom and two M12 bolts from the
back to mount the cradle as shown in Fig. 7-4.
AE4000
~
6300-SW 3P & 4P (HN)
AE4000
~
6300-SW 4P (FN)
Mounting angle (Non-magnetic)
2-M12
6-M12
2-M12
4-M12
Mounting angle (Non-magnetic)
Cradle
Support
Содержание AE-SW Series
Страница 78: ...ӄཐଆ D 49 ...
Страница 79: ...ӄཐଆ D 4 CHINESE ቲྲྀ ...