Mitel TA7102, Руководство по установке

Страница: 6 / 53

TA7102 Hardware Installation
6
153/1531-ANF 901 14 B 2017-03-08
1.5 DOCUMENT CONVENTIONS
The following information provides an explanation of the symbols that appear on the TA7102 and in the
documentation for the product.
Warning Definition
Warning: Means danger. You are in a situation that could cause bodily injury. Before you work on any
equipment, you must be aware of the hazards involved with electrical circuitry and be familiar with
standard practices for preventing accidents.
Where to find Translated Warning Definition
For safety and warning information, see
“Appendix A - Standards Compliance and Safety Information” on
page 19.
This Appendix describes the international agency compliance and safety information for the TA7102. It
also includes a translation of the safety warning listed in the previous section.
Other Conventions
The following are other conventions you will encounter in this manual.
Caution: Indicates a potentially hazardous situation which, if not avoided, may result in minor or
moderate injury and/or damage to the equipment or property.
Note: Indicates important information about the current topic.
Standards Supported Indicates which RFC, Draft or other standard document is supported for a
specific feature.
SCN vs PSTN
In Mitel
’ and other vendor’s documentation, the terms SCN and PSTN are used. A SCN (Switched Circuit
Network) is a general term to designate a communication network in which any user may be connected to
any other user through the use of message, circuit, or packet switching and control devices. The Public
Switched Telephone Network (PSTN) or a Private Branch eXchange (PBX) are examples of SCNs.
Standards Supported
When available, this document lists the standards onto which features are based. These standards may
be
RFCs (Request for Comments), Internet-Drafts, or other standards.
The TA7102
’s implementations are
based
on the standards, so it’s possible that some behavior differs
from the official standards.