Mitel TA7102, Руководство по установке

Страница: 40 / 53

TA7102 Hardware Installation
40
153/1531-ANF 901 14 B 2017-03-08
6.2 RJ-11 (TELEPHONE) CABLE
The RJ-11 cable is commonly used for telephone connection.
Caution: Do not plug a phone jack connector into an RJ-45 port.
Wiring Conventions
For telephone connections, a cable requires one pair of wires. Each wire is identified by different colours.
For instance, one wire might be red and the other, red with white stripes. Also, an RJ-11 connector must
be attached to both ends of the cable.
Each wire pair must be attached to the RJ-11 connectors in a specific orientation. The following figure
illustrates how the pins on the RJ-11 connector are numbered. Be sure to hold the connectors in the
same orientation when attaching the wires to the pins.
Figure 9: RJ-11 Connector Pin Numbers
Table 12: RJ-11 Pinout Information
Pin # Function
1 Not used
2 Not used
3 Ring
4 Tip
Table 12: RJ-11 Pinout Information (Continued)
Pin # Function
5 Not used
6 Not used
The RJ-11 pair of wires is wired so that pins 3 and 4 are connected to the Ring and Tip, which meets the
following requirements: