Mita DP-1400, Инструкция по эксплуатации

Страница: 73 / 134

2.12. Draft Mode
2-25
Optimized stripes
The current KIR setting is optimal.
Dark vertical stripes
Set the KIR mode to
Off
. Try printing the status page again. If you still get
dark vertical stripes, adjust the print density control to a lighter setting. (See
the last page in this manual.)
White vertical stripes
Set the KIR mode to
On
. Try printing the status page again. If you still get
white vertical stripes, adjust the print density control to a darker setting.
(See the last page in this manual.)
2.12. Draft Mode
The Draft enables you to reduce the amount of toner consumed on the page so as to save your printing costs.
You can set to Draft mode on, as follows. (The factory-setting is
Off . )
The Draft mode setting is
On
when the printing image becomes lighter, yet very readable.
☛ The Draft setting has no effect on the print speed.
Draft setting is
Off
(default).
Draft setting is
On