Mita DP-1400, Инструкция по эксплуатации

Страница: 66 / 134

2.7. Setting Custom Sizes
2-18
2.7. Setting Custom Sizes
When setting sizes other than A5, A4, B5, Letter or Legal into the paper cassette, set the size of the paper to
be used into the printer by the following procedure.
1.
Display
Paper handling>
on the printer's display panel and press the key. Then use the
+
and
–
keys to display
>Cassette size >
.
2.
By pressing the key
>>Unit
appears as shown in the diagram below (The unit of the paper length).
You can select
mm
or
inch
by using the
+
and
–
keys.
3.
With the unit settings completed,
>>X dimension
appears as shown in the diagram below (the
paper width setting). Press the
ENTER
key while in this state and the cursor begins to flash.
☛ The width that can be set must be in the range of 148-216mm (5.83-8.5 inches).
4.
By pressing the
+
and
–
keys the numbers above the cursor change. By pressing the or keys the
position of the cursor moves.
5.
When you have input the desired custom size, press the
ENTER
key to complete the width setting.
6.
With the width settings completed, press the
+
and
–
keys and
>>Y dimension
appears as shown
below (the paper length setting). Set this in the same way as the width setting.
☛
The length that can be set must be in the range of 210-356mm (8.27-14.02 inches).
>>X dimension
216 mm
>>Y dimension
356 mm
>>Unit
inch
>>Unit
mm
_
_