Mita DP-1400, Инструкция по эксплуатации

Страница: 54 / 134

2.2. Operating Procedures
2-6
2.2. Operating Procedures
Switching Power On
Check that the power cord is securely plugged in at both ends.
Check that the printer is connected to the computer. In switching
power on, the general rule is to switch on printer power first, com-
puter power second.
1.
Push the power switch to the ON (
|
) position.
2.
Wait for the printer to warm up. During warm-up the mes-
sage display indicates
Self test
.
At the end of the warm-up period, the ON LINE indicator lights, and the message display indicates
Ready
.
The printer is now ready to print.
Stack Selection
The
STACK
key selects the tray to which the printed pages are delivered. The
STACK
key can be used whenever
the message display indicates
Ready
.
Press the
STACK
key. The selection toggles and is momentarily displayed in the message display as:
Face-up tray
Face-down tray
If you have installed the optional sorter or stacker,
Sorter
or
Bulk
stacker
will also be displayed.
The current selection is indicated by a green light on the printer symbol above the
key.
Also, if the printer is being used with the optional sorter or stacker, the destination of the paper from each
can be selected.
Feed Selection
The
FEED
key selects the paper feed cassette [
Cassette
] or MP tray
[
MP tray
] (or the option paper feeder[s], if installed) as the paper source. The
FEED
key can be used whenever the message display indicates
Ready
or
Add
paper
.
Press the
FEED
key. The selection cycles and is momentarily displayed in the mes-
sage display as:
Cassette
(
paper size )( paper type )
MP tray[
MP tray mode
]
(
paper size
)(
paper type
)
CAUTION
If the printer will not be used for a short period of time (overnight, etc),
turn the main switch OFF (
). If it will not be used for an extended
period of time (vacations, etc), remove the power plug from the outlet
for safety purposes during the time the printer is not in use.
Power Switch