Miranda XVP-3901 DENSITE series, Руководство по установке и эксплуатации

Страница: 82 / 143

GUIDE TO INSTALLATION AND OPERATION
76 | XVP-3901
Changing the Program Configuration may affect the selected preset for the other programs. This is especially true if
the number of programs increases or decreases. The following pop-up may appear:
Note that it may take up to 10 seconds for the new configuration to be established and for the panel to update.
5.10.2.1 MOD-JA-ALC-2 (and –DUP)
The table below shows the possible configurations for a 2-channel ALC module. The first column indicates the
configurations without upmix (or when upmix is disabled). The other 2 columns indicate the possible configurations
when the upmix is enabled and in the specified mode.
Valid Config for JA-ALC-2 Valid Config with Upmix (Auto, Follow) Valid Config with Upmix (forced Upmix)
2
1
1+1 2
It can be seen that the upmix is only available in one upmix configuration for the 2-channel ALC. It is not possible to
use the upmix in PASS, AutoMAX-II or Follow Metadata Path configuration.
5.10.2.2 MOD-JA-ALC-6
The table below shows the possible configurations for a 6-channel ALC module. The first column indicates the
configurations without upmix (or when upmix is disabled). The other 2 columns indicate the possible configurations
when the upmix is enabled and in the specified mode.
Valid Config for JA-ALC-6 Valid Config with Upmix (Auto, Follow) Valid Config with Upmix (forced Upmix)
5.1
4
3
2
2+2
2+1
2+1+1
2+2+2
2+2+1
2+2+1+1
2+1+1+1
2+1+1+1+1
1
1+1
1+1+1
1+1+1+1
1+1+1+1+1
1+1+1+1+1+1 5.1
4
3
2
2+2
2+1
2+1+1
2+2+2
2+2+1
2+2+1+1
2+1+1+1
2+1+1+1+1
1
1+1
1+1+1
1+1+1+1
1+1+1+1+1
1+1+1+1+1+1
5.1
4
3
2
2+2
2+1
2+1+1
2+2+2
2+2+1
2+2+1+1
2+1+1+1
2+1+1+1+1
1
1+1
1+1+1
1+1+1+1
1+1+1+1+1
1+1+1+1+1+1