GUIDE TO INSTALLATION AND OPERATION
72
| XVP-3901
Threshold /Inf > Thr
•
B1 - B5 AGC Thresh(old): -12.00dB - +12.00dB (default:
0.00dB all). The reference point for the attack and
release parameters to act on the audio signal present in
that band.
•
B1-B5 Inf:1 Above Thresh: Enabled / Disabled (default:
B1: Enabled, B2: Enabled, B3: Disabled, B4: Disabled,
B5: Disabled). AGC automatically increases the ratio to
Infinity:1
once a signal exceeds the threshold (set
below), allowing for expansion below the threshold and
limiting above the threshold. Useful for bass frequency
control.
Attack / Release
•
B1 - B5 AGC Attack: 0 - 150, slowest - fastest (defaults:
B1:46, B2:88, B3:88, B4:88, B5:92). How fast an input
signal is acted upon once is crosses the set threshold
•
B1 - B5 AGC Release: 0 - 150, slowest - fastest
(defaults: B1:50, B2:60, B3:86, B4:88, B5:92). How fast
an input signal recovers from a gain change once that
signal falls below the set threshold.
Figure 5.62
ALC Module – MB AGC – Threshold
Figure 5.63
ALC Module – MB AGC – Attack/Release
