Miranda NV9606 Скачать руководство пользователя страница 18 | Manualshive

Страница: 18 / 90

background image

8

Rev 1.0 • 21 May 10

2. Introduction

Modes of Operation

Modes of Operation

The NV9607 operates in one of 4 modes:

•

Limited X-Y Mode

.

•

Single-Destination Mode

•

Single-Destination Mode with Breakaway

.

•

Multi-Destination Mode

The panel’s set of button functions varies with the mode.
The modes (or behavioral models) are determined at configuration. The operator cannot switch
between different modes.

S

The NV9606 control panel can operate as an extension of the NV9607. See the

NV9606 User’s

Guide

for details.

Limited X-Y Mode

In limited X-Y mode, takes occur from a single source to a single destination (selectable).
Pressing a source button completes a take unless a panel has a ‘Source Preview’ button and it is
active (high-tally).

Breakaway is possible in this mode if the panel has level buttons. Level buttons select the levels on
which the take is to occur. Takes occur on all levels when either no levels are selected or when all
levels are selected.

Operators can use a ‘Source Shift’ button to toggle between two sets of sources. Similarly, opera-
tors can use a ‘Destination Shift’ button to toggle between two sets of destinations.

Single-Destination Mode

In single destination mode, the panel’s destination is configured as the default destination and there
are no destination buttons.
Pressing a source button completes a take unless a panel has a ‘Source Preview’ button and it is
active (high-tally).

Takes are all-level.

Operators can use a ‘Source Shift’ button to toggle between two sets of sources.

Single-Destination Mode with Breakaway

Again the single destination is configured as the default destination. There are no destination but-
tons.
Pressing a source button completes a take unless a panel has a ‘Source Preview’ button and it is
active (high-tally).

Breakaway is possible in this mode if the panel has level buttons. Level buttons selected the levels
on which the take is to occur. Takes occur on all levels when either no levels are selected or when
all levels are selected.

Operators can use a ‘Source Shift’ button to toggle between two sets of sources.

«
...
16
17
18
19
20
...
»

Содержание NV9606



























































































Отзывы:

Нет отзывов

Похожие инструкции для NV9606

Бренд: UE Страницы: 4

Бренд: Quectel Страницы: 23

Бренд: Quectel Страницы: 79

Бренд: T&S Страницы: 5

Бренд: Daikin Страницы: 46

Бренд: Daikin Страницы: 26

Бренд: ABB Страницы: 17

Extinguishing Control Panel BC06-2EXT

Бренд: LST Страницы: 4

Бренд: Rain Bird Страницы: 48

Бренд: Sullair Страницы: 31

Бренд: Quickie Страницы: 108

Бренд: GARDINER TECHNOLOGY Страницы: 28

Бренд: Immergas Страницы: 4

WISE-224 Series

Бренд: ICP DAS USA Страницы: 8

iAqualink IQ904-P

Бренд: Zodiac Страницы: 2

Eyewitness HD ICV System

Бренд: Kustom Signals Страницы: 4

The t.mix Source Mix IR

Бренд: thomann Страницы: 24

Бренд: Avanza Страницы: 10

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды