Miranda NV9606, Руководство пользователя

Страница: 29 / 90

NV9607 Control Panel • User’s Guide 19
4. Configuration
Commitment Buttons
• Display options.
In this section, configurers may partially specify the ordering of levels when the panel is in X-Y
mode, single-destination mode, or single-destination mode with breakaway.
In these modes, the display shows level information. When the display is configured with 4
lines, it displays 4 levels and when the display is configured with 8 lines, it displays 8 levels.
(The display scrolls if the panel has ‘Page Up’ and ‘Page Down’ buttons.) The display options
let you specify explicitly what levels appear on those 4 (or 8) lines. The specification applies,
however,
only to the first page of the level display.
For example, if your NV9000 configuration has levels HD, SD, AES12, AES34, AES56,
AES78, timecode, and ‘Ctrl’ defined, and you specify that HD, AES12, AES34 are to appear on
lines 1, 2, and 3, that will always happen. Other levels will appear
in their default order on page
2, 3, and so on, as the operator scrolls.
During configuration, you may leave any of the fields in this section blank. If you leave all of
the fields blank, the display will present levels
in their default order (according to their display
index, as defined in NV9000-SE Utilities).
If you leave some fields blank, those display lines will appear blank, while the lines for which
you specified a level will show that level.
S
Filling any field of the display options (with an actual level) means that the entire first page
of levels contains either blank lines or the level(s) you specify.
Configuration Tasks
The person configuring an NV9607 panel will want to consider how best to use the buttons to sup-
port the devices and routers in the router control system at hand. Trade-offs must be made.
In support of that effort, the configurer will do the following:
• Determine in which of the 4 modes the panel with this configuration will run.
• Select panel options.
• Assign functions to buttons.
• Define logic for some or all of the tally inputs and outputs.
The panel operator, in most cases, needs a ‘Page Up’ button and a ‘Page Down’ button. A ‘Take’
button might be needed if your panel has a ‘Source Preview’ button.
Commitment Buttons
Two buttons at the bottom of the configuration page are self-explanatory and appear on most con-
figuration pages:
• Revert to Saved. Press this button if you want to discard any recent changes you have made.
• Save. Press this button to commit all your recent changes.
Neither of these actions is reversible.