MIRACALL TECHNOLOGY CO.,LTD
６７
once and exit from system or hook on or off to exit.
For example: Extension 8001 at extension port No. 001 and extension 8003 at extension port
No. 003 ring together when outside line call in. But 8003 is a fax machine, so 8003 is set to ring
after 8001 rings twice.
On hook-on status,
press “CHECK” key three times- input system password “1234567”-11-001- press
“TRFR” key- -003- press “TRFR” key-11111111- press “ HOLD” key-13-003- press “TRFR”
key-11111111-press “ HOLD” key-04-00211- press “ HOLD” key- press “CLEAR” key and exit.
Operation at single line phone
Hook off and input “##787” and system password “1234567” . Then input purpose System Program13 and
input purpose port No. after hear “du” identification tone. Then press “*” key once and cursor shifts to
function
column and input relative digit for the function. If want to set other special extension to dial out ,
Then press “*” key once and cursor shifts to extension port No.,
and repeat the above procedure. After
confirm, press “ #” key once and exit from System Program13 automatically. If still program other system
item, input purpose item No. . Otherwise, hook on to exit.
For example: Extension 8001 at extension port No. 001 and extension 8003 at extension port
No. 003 ring together when outside line call in. But 8003 is a fax machine, so 8003 is set to ring
after 8001 rings twice.
Hook off and input “##787”- input system password “1234567”-11-001- press “*” key-11111111- press
“*” key-003- press “*” key-11111111- press “ #” key-13-003- press “*” key-11111111- press “ #”
key-04-00211- press “ #” key- Hook on and exit.
Outside Line Setting
*2-5-27 Enable or Disable a Trunk Line
Function Introduction
System can open and restrict Trunk line port by program. For example, must set to restrict some Trunk line
ports when the Trunk lines are not used. Otherwise, system will be in mute status, but not send dialing tone
when call out at extension.
Default Setting
-10030 ,all trunk lines enabled.
Note:
* The function is set at System Program 01.
1-10030: “1” stands for Trunk line port No., The meaning of the first digit of “ 10030” – “2” stands for
opening caller ID function. “ 1” stands for system opens Trunk line port and “2” stands for system restrict
Trunk line port.
* If system don’t use Trunk line port, please set to restrict. Otherwise, system will not operate when calling
out.
