MIRACALL TECHNOLOGY CO.,LTD
５２
Operation at key phone
On hook-on status, press “CHECK” key three times and input system password “1234567”. Then input
purpose System Program29 and input purpose extension port No. to after hear “du” identification tone.
Then press “TRFR” key once and cursor shifts to extension number column, then press “CLEAR” key and
delete original extension number, then input new extension number. Finishing inputting means finishing
changing extension number. If want to revise other extension number, Then press “TRFR” key and cursor
shifts to extension port No. column,
And repeat the above procedure. After confirm, press “ HOLD” key once
and exit. If still program other system item, input purpose item No. . Otherwise, press “CLEAR” key once
and exit from system or hook on or off to exit.
For example: Revise extension number 8001 at extension port No. 001 to 388.
On hook-on status, press “CHECK” key three times-1234567-29-001- press “TRFR” key- press “CLEAR”
key - press –388-“ HOLD” key once-press “CLEAR” key once and exit.
Operation at single line phone
Hook off and input “##787” and input system password “1234567”. Then input purpose System
Program29 and input purpose extension port No. to after hear “du” identification tone. Then press “*” key
once and cursor shifts to extension number column, then press “*” key once and delete original extension
number, then press “*” key once and input new extension number. Finishing inputting means finishing
changing extension number. If
want to revise other extension number, then press “*” key once and cursor
shifts to extension port No. column ,
And repeat the above procedure. After confirm, press “ #” key once
and exit. If still program other system item, input purpose item No. . Otherwise, hook off to exit.
For example: Revise extension number 8001 at extension port No. 001 to 388.
Hook off and input “##787”-1234567-29-001- press “**” key- 001 - press “*” key–388- press “ #” key
once- hook off to exit.
* 2-5-15 Class of Service
Function Introduction
Users can choose service of class to control dialing-out authority according to their requirement .
Default Setting
***- 14
In normal status, the first class is the highest class and non-restriction. The class of blocking is the forth
class.
Notice
* There 6 types of Class of Service, and two mode: normal mode and blocking mode (locking mode). And there
are restriction code and open code for every class. The restriction code is set at System Program 15 and 16
and open code is set at System Program 17 and 18. When programming, user can choose service class from
1 to 6. And the classes stand for the following:
