MIRACALL TECHNOLOGY CO.,LTD
３９
* The function is set at System Program 02.
* Setting of item No. 02 for outside line: “11020” represents for dialing out without pressing”9”,
“11030” represents for dialing out without pressing”0”.
* Extension doesn’t have the function the in Trunk Line tone status when Off-hook .
*
The function can not exist with built-in IP function.
Program Process
Operation at Key Phone
On hook-on status, press “CHECK” three times and input password “1234567”, input item code “02” after
hearing “du” identification tone. Then input purpose Trunk Line port number X (X stands for Trunk line
port number from 1 to 8 . Or input *, which stands for all Trunk line port.), then press “TRFR” key once and
cursor shifts to program status column and input “11020” (represents that doesn’t press dialing-out code
“9” to call out in virtual net or input “11030”, represents that doesn’t press dialing-out code “0” to call out
in virtual net.).Finishing inputting means complete program change. If want to change other Trunk Line
port, press “TRFR” key once and cursor shifts to Trunk line port status, then input Trunk line port number,
and repeat the above procedure. After confirm, press “ HOLD” key once and exit from item no. 02
automatically. If still want to program other item, input item number after hear “ du” identification tone
once. Then you can program, otherwise press“ CLEAR ” key once, and exit from system or hook off / hook
on to exit system.
For example: set Trunk line port No. 01 as dialing out without pressing “9”.
On hook-on status, press “ CHECK” key three times + 1234567-02-01-press “TRFR” key once – 11020 -
press “HOLD” key once + press “ CLEAR ” key once, and exit.
Operation at single line Phone
On hook-off status, press “##787” and input password “1234567”, input item code “02” after hearing “du”
identification tone. Then input purpose Trunk Line port number X ( X stands for Trunk line port number
from 1 to 8 . or input *, which stands for all Trunk line port.), then input “*11020” (represents that doesn’t
press dialing-out code “9” to dial out in virtual net or input “11030”, represents that that doesn’t press
dialing-out code “0” to dial out in virtual net.).Finishing inputting means complete program change. If want
to change other Trunk Line port, press one “*” key once and cursor shifts to Trunk line port status, then
input Trunk line port number , and repeat the above procedure. After confirm, press “#” key once and exit
from item no. 02 automatically. If still want to program other item, input purpose. Otherwise hook on and
exit.
For example: set Trunk line port NO 01 as dialing out without pressing “9”.
On hook-on status, press “##787”+1234567-02-01-press “*” – 11020 - # - hook on - exit.
*
2-5-04 IP Routing
Function Introduction
System can switch to be in IP routing mode by programming and you can save one or more IP card numbers
with passwords in system. Then, system can route your long-distance calls automatically through IP routes
in order to save money.
