Mira Advance ATL, Инструкция по установке и эксплуатации

Страница: 29 / 56

29
2.5. IMPORTANT! TO TURN OFF
always press the 'STOP' button
to allow the Mira Advance ATL to
perform its shutdown sequence.
The red indicator will illuminate and
an audible tone will confirm the
action. The Mira Advance ATL will
continue to run for a few seconds
before stopping. This phased
shutdown is to remove heat from
the element assembly and tank
body.
Clockwise
$
WARMER
$
less flow
Anticlockwise
$
COOLER
$
more flow
For the Advance ATL Memory
model.
To leave memory control mode,
and to regain the use of the
'TEMPERATURE' control knob
press one of the following buttons;
'HIGH', 'MEDIUM' or 'LOW'. The
shower temperature and flow rate
will change from the preset
memory button condition to that
selected by the chosen flow
button and 'TEMPERATURE'
control knob position.
Hint! When returning to standard
control, position the
'TEMPERATURE' control knob at
the midpoint i.e. TEMPERATURE'
control knob vertical.