7
Troubleshooting
7-4
CF9001
7.2
The Copier is not functioning as designed
If these procedures do not correct the problem, contact your Technical
Representative.
Symptom
check for:
Action
The touch panel shows
nothing.
Is only the Start key lit up
green?
The copier is in the Energy
Saver mode.
Press any key on the control
panel to cancel the Energy
Saver mode, see page 2-13.
The display contrast control
knob is placed in the
excessively light or dark
position.
Viewing the touch panel, turn
the display contrast control
knob as necessary.
The Start key does not light
up green.
Is your Access number
entered?
Enter your Access number,
see page 2-15.
No copies are fed out when
the Start key is pressed.
The copier was just turned
ON and is warming up.
It takes the copier about 9
minutes to be ready for
making copies after it has
been turned ON.
Please wait.
The copier has developed a
malfunction.
Check the touch panel and
take action according to the
message on the panel, see
page 6-25.
Control panel keys do not
respond.
The Interrupt key LED is lit
up.
The copier is in the interrupt
mode.
Press the Interrupt key to
cancel the interrupt mode,
see page 2-14.
The copier is not activated
when the power switch is
turned ON.
The power cord is left
unplugged from the power
outlet.
Plug the power cord into the
power outlet.
The room circuit breaker is
open.
Close the room circuit
breaker.
Содержание CF 9001
