When a Message Appears
6
CF9001
6-25
6.7
What Does Each Message Mean?
Message
Cause
Action
Please call tech. service.
code: XXXXX
The copier malfunctioned
and is unable to make
copies.
Call and inform your
Technical Representative of
the code being shown on the
touch panel.
Input your 4-digit Access
Code Number, and press
OK.
An access number has been
set and the number assigned
for your own department
must be entered before you
can make a copy.
Enter the 4-digit access
number. (“Access Number”,
see page 2-15)
Please insert the Key
Counter.
The key counter is not
plugged in and the copier is
unable to make copies.
Plug in the key counter.
Load paper in the XXXXX
Tray.
The currently selected tray
has run out of paper.
Load the tray with paper, see
page 6-2.
Please add XXXX Toner.
Follow the label inside the
front door.
Toner has run out and the
copier is unable to make
copies.
Replenish toner,
see page 6-5.
Toner is soon running out.
The Staple Cartridge is
empty. Please replace with a
new one.
The staples have run out.
Replace the staple cartridge
with a new one,
see page 6-8.
Misfeeding is detected.
Please remove paper at
.
A misfeed has occurred and
no copy cycle can be
initiated.
Clear the misfed sheet of
paper, see page 6-11.
The section indicated by
➜
is
open. Please close it
properly.
A copier door is left open or
an option is not attached
properly and the copier is
unable to make copies.
Close the door or cover and
attach the option properly.
The Fuser Oil has run out.
Please call your technical
rep.
The fuser oil needs to be
replenished.
Please call your technical
representative.
The Fuser Oil has run out.
Please replenish.
The fuser oil has run out and
the copier is unable to make
copies.
Please replenish the fuser
oil, see page 6-19.
Toner Collecting Bottle is
nearly full.
Please call your tech. rep.
The toner collecting bottle is
full and the copier is unable
to make copies.
Please call your technical
representative.
Copies remain in the Duplex
Unit.
Press START to feed them
out.
A copy or copies are left in
the duplex unit and the
copier is unable to make
copies.
Press the Start key to
remove all copies from the
duplex unit.
Sorter has reached its
capacity.
Please remove all copies
from bins first.
Sorter has reached its
capacity.
Remove all copies from the
bins first.
Remove all copies from the
sorter bins.
Содержание CF 9001
