Minicom Smart CAT5 Switch 16 IP, Руководство по эксплуатации, Страница: 48 / 80

SMART CAT5 SWITCH 16 IP
.
3. Press the Update button. The firmware updates. Warning! This process is
irreversible; ensure the Smart 16 IP's power supply won't be interrupted during
the update process, as this may cause damage.
4. When prompted reset Smart 16 IP manually by pressing the
button. When pressed all connections to the administration
or Remote console close. 30 seconds later, Smart 16 IP runs with the new
firmware. You must login again.
Attention : Only experienced staff members or administrators should perform a
firmware update.
62.
63.
64.
Data file for support
Click the link to access the Smart 16 IP data file. The file contains support
information, which will help us to troubleshoot your problem.
Include/modify custom HTML code
You can modify the HTML code of the Home page to include customized
graphics and text. You can’t save graphics on the Smart 16 IP therefore the
graphics should be accessible on the Network. Define Primary and secondary
DNS in the Network settings if needed.
Access via Telnet
Connect via a standard Telnet client using Smart 16 IP’s Telnet server. Use it for
passthrough access to a device connected to serial port 1. Connect any serial
device, which offers terminal access via its serial port and access it using the
Telnet interface. Set the serial settings - see page 34 - according to the
requirements of the device.
Connect to Smart 16 IP in the usual way required by the Telnet client, e.g. in a
UNIX shell:
telnet 192.168.0.220 – ( The IP address has been replaced by the
one that is actually assigned to Smart 16 IP).
Type a username and password when prompted. These are identical to those of
the Web interface. The user management of the Telnet interface is controlled just
like the Web interface.
Once logged in, the command line appears to type management commands.
The interface supports both the command line and terminal modes. The command
line mode is used to control or display some parameters. In terminal mode the
passthrough access to serial port 1 is activated (if the serial settings were made
accordingly). All inputs are redirected to the device on serial port 1 and the
answers appear on the Telnet interface.
47
.