Minicom Smart CAT5 Switch 16 IP, Руководство по эксплуатации

Страница: 45 / 80

OPERATING GUIDE
.
Trap destinations Enter IP addresses, to which the traps will be sent. For every
IP address, set an according community so that your management client can
identify the SNMP traps.
After making the entries click .
57.
58.
The Smart 16 IP SNMP MIB
Click the link to access the Smart 16 IP SNMP MIB file. With it, an SNMP client
can communicate with Smart 16 IP.
IPMI Settings
The Smart 16 IP IPMI (Intelligent Platform Management Interface) is an
additional way to power on or off the system or to perform a hard reset. You can
also show an event log of the host system and the status of some system sensors
(i.e. temperature). If your host system supports IPMI, you can access it in one of
the following ways:
•
IPMI over Serial
•
IPMI over LAN
Both require IPMI V1.5.
From the Smart 16 IP Menu choose IPMI Settings. The IPMI Settings appears.
See Figure 28.
Figure 28 IPMI Settings
IPMI disabled - Disables IPMI. Status via IPMI and Event Log via IPMI are not
available and the power on/off and reset functions won't use IPMI.
BMC address - Hexadecimal Baseboard Management Controller address.
Needed for all types of communication to the IPMI-interface. Usually you can
find this address in the BIOS of the host system. The default and common value is
20.
44
.