background image

SMART CAT5 SWITCH 16 IP

.

 

Targeted KVM port 

1.  Choose the port to which a KVM switch is connected.  

2.  Press 

 to display the current values for the selected KVM port. 

Without pressing 

 alterations will 

NOT

 be made to the chosen port. 

Keyboard Model

 - Choose the keyboard model 

Mouse Model

 - 

Choose the mouse model 

 

Direct (1:n) mouse mode 

Use a direct translation of mouse movements between the host and the remote 
pointer. Fix a scale, which determines the amount the client mouse pointer moves 
when the host mouse pointer moves by one pixel. This only works when Mouse 
Acceleration on the local computer is disabled. 

Automatic speed detection 

When Mouse Acceleration on the local computer is enabled, check Automatic 
speed detection. We highly recommend disabling the Mouse Acceleration. 

G&D Equalizer

 – This supports to the mouse synchronization for Guntermann & 

Drunck KVM switches. These switches perform an internal rescaling of the 
mouse movements, which cause the existing algorithm to break if Smart 16 IP is 
connected behind such a switch. This option detects the rescaling and 
compensates for it, so that the mouse synchronization works. Choose auto or a 
number from the drop down menu. 

 - Click to apply changes 

 - If the keyboard or mouse seems to react irrationally click to reset the 

keyboard and mouse emulation. It is like disconnecting and reconnecting the 
keyboard and mouse connectors. 

26.  KVM Settings  

By default the Smart 16 IP is configured for 16 ports. When you want to add 
more, adjust the settings for the KVM ports. From the Smart 16 IP menu choose 
KVM Settings. The Smart 16 IP KVM settings appear. See Figure 13. 

21

.

 

Содержание Smart CAT5 Switch 16 IP

















































































Отзывы: