Mindray PM-60Vet, Руководство оператора

Страница: 53 / 96

6-3
6.3 Applying the Sensor
1. Select an appropriate SpO
2
sensor according to the animal category and weight.
2. Apply the SpO
2
sensor to the patient.
3. Connect the SpO
2
extension cable to the pulse oximeter.
6.4 Changing SpO
2
Settings
6.4.1 Switching On/Off SpO
2
and PR Alarms
1. Select [
Menu
] → [
Alarm Setup
].
2. Select SpO
2
or PR [
Alarm
] and toggle between:
„ [
On
]: When an alarm limit is exceeded, the pulse oximeter will give an alarm
according to the defined alarm level.
„ [
Off
]: When an alarm limit is exceeded, the pulse oximeter will not give an
alarm; the audible and visible alarm as well as the alarm message will be
switched off and the symbol will be shown in the SpO
2
or PR area.
6.4.2 Setting Alarm Level
1. Select [
Menu
] → [
System
] → [
Maintenance >>
] → enter required password.
2. Select [
Alarm >>
].
3. Select [
SpO2 Alm Lev
] and toggle between [
High
] and [
Med
].
4. Set [
PR Alm Lev
] to [
High
], [
Med
] or [
Low
].
The level of the “No Pulse” alarm is configured to high and is not user adjustable.