Mindray PM-60Vet, Руководство оператора

Страница: 35 / 96

4-1
4
Basic Operations
4.1 Selecting the Work Mode
The pulse oximeter is designed to operate in the continuous monitoring and
spot-checking mode. The continuous monitoring mode is intended for long-term
monitoring. This mode is normally selected when the patient is in hospital or under
transport. The spot-checking mode is intended for short-term on-site measurement. This
mode is normally selected to check outpatient or to check inpatient when doctors make
rounds of the wards.
To select the work mode,
1. Select
[
Menu
] → [
System
] → [
Maintenance >>
] → enter required password.
2. Select [
User Maintenance >>
] and then select [
Work Mode
] to toggle between
[
Spot-Check
] and [
Continuous
]. Press the Right button and follow the prompt.
The work mode is shown in the technical alarm area. When other technical alarms or
prompt messages occur, the work mode and the message will be displayed circularly.
NOTE
z
The trend data of the continuous monitoring mode will be cleared if you
change the continuous monitoring mode to the spot-checking mode.