Mindray PM-60Vet, Руководство оператора

Страница: 41 / 96

4-7
4.11 Setting Auto Poweroff
In the spot-checking mode, you can select to shut off the pulse oximeter automatically:
1. Select
[
Menu
] → [
System
] → [
Maintenance >>
] → enter the required password.
2. Select [
User Maintenance >>
], and then select [
Auto Quit
] to toggle between:
„ [
Allowed
]: The pulse oximeter will shut down automatically if no button
operation and SpO
2
signal are detected for 5 minutes in the standby mode.
„ [
Unallowed
]: The pulse oximeter will not shut down if no button operation
and SpO
2
signal are detected for 5 minutes in the standby mode.
4.12 Configuration
The pulse oximeter provides factory configuration and user configuration. The
configuration is loaded and saved according to the operating mode and patient category.
SpO
2
and PR alarm limits are subject to the patient category. The user configuration will
be loaded first when the pulse oximeter is started. If the user configuration is not
available, corresponding factory configuration will be loaded. Refer to
C Factory
Defaults
.
4.12.1 Restoring the Factory Configuration
If you have changed the system’s configuration and want to restore the factory
configuration, follow this procedure:
1. Select
[
Menu
] → [
System
].
2. Select [
Load Factory Conf.
].
The factory configuration will be restored according to the current work mode and
patient category.