Mindray DC-25, Руководство по обслуживанию

Страница: 124 / 213

7-24 Structure and Assembly/Disassembly
This section describes the disassembling and assembling of the main modules and
boards. The assembling is the inverse process of disassembling if not mentioned in
particular.

Sketch
Power input
assembly
IO backpanel
IO
interface
board
Probe
connectin
g board
Control panel
assembly
Track
ball
Enc
oder
Control
panel
Power module
OSD
Key board
Speaker
TGC
boar
d
USBA
dapter
board
Buzze
r
Display
assembly
Hard Disk
CPU
module
Note:
1. The up-to-down arrows indicate the
assembly/disassembly sequence
2. The box with the same content format
indicates independent assembly
Main unit rear cover
Main Unit Box Module
Probe
board
assembly
Main
board
assembly
Main
unit
fan
Main unit
front cover
4D
board
ECG
modul
e
Fig 7-2 Assembly and Disassembly Illustration
7.4.1 Monitor assembly
Tool: Cross-headed screwdriver and the diagonal cutting pliers. Please refer to Chapter
7.3.1 Tools Required
for tools’ specifications.
Note:
IF you need to replace monitor assembly, please refer to the previous
assembly, and select the corresponding label. Then, stick it to the monitor
assembly.
1. Remove the M4X12 screws (2 pcs) which are used to secure the monitor cable, and
then remove the monitor cable cover aslant.
NOTE:
The illustration of disassemble is provided for reference only, and the
concrete picture depends on the actual model.