Gas Module 3 Operating Instructions
5 - 3
Appendix
Electromagnetic Capability
5.3
Electromagnetic Capability
The
Gas Module 3
meet the requirements of IEC 60601-1-2/EN 60601-1-2.
NOTE:
The Gas Module 3 needs special precautions regarding EMC
and needs to be installed and put into service according to
the EMC information provided below.
NOTE:
Portable and mobile RF communications equipment can
affect the Gas Module 3. See tables 5-1 through 5-4 that
follow.
TABLE 5-1
GUIDANCE AND MINDRAY DS USA, INC. DECLARATION - ELECTROMAGNETIC
EMISSIONS
The
Gas Module 3
is intended for use in the electromagnetic environment specified below. The
customer or the user of the
Gas Module 3
should assure it is used in such an environment.
EMISSIONS
TEST
COMPLIANCE
ELECTROMAGNETIC ENVIRONMENT - GUIDANCE
RF emissions
CISPR 11
Group 1
The
Gas Module 3
uses RF energy only for their
internal function. Therefore, their RF emissions are very
low and are not likely to cause any interference in
nearby electronic equipment.
RF emissions
CISPR 11
Class A
The
Gas Module 3
is suitable for use in all
establishments other than domestic establishments and
those directly connected to the public low-voltage power
supply network that supplies buildings used for domestic
purposes.
Harmonic
emissions IEC
61000-3-2
Class A
Voltage
fluctuations/
Flicker
emissions IEC
61000-3-3
Complies
