MIMAKI TS500-1800, Руководство по эксплуатации

Страница: 77 / 184

3-9
1
1
3
Convenient use
5
6
Setting Auto Cleaning
You can set the machine so that it counts the number of printed files or the length or time after printing has
been completed, and performs cleaning automatically if required.
You can select the auto cleaning setting from three types below:
• PAGE : Set the cleaning intervals by the number of printed files.
• LENGTH : Set the cleaning intervals by the printed length.
• TIME
: Set the cleaning intervals by the printed time.
The machine can perform a stable printing operation with its heads always kept clean.
1
Press the key in LOCAL.
2
Press the key.
3
Press to select [AUTO CLEANING] and
press the key.
4
Press to select the type of auto cleaning.
• There are “PAGE”, “LENGTH” and “TIME” for auto cleaning.
PAGE : When the set number of prints has been completed, the machine performs head cleaning automatically.
LENGTH : When the set length has passed, the machine performs head cleaning automatically.
TIME
: When the set time has passed, the machine performs head cleaning automatically.
• If you do not set auto cleaning, first select “OFF” and then proceed to the Step 10.
5
Press the key.
6
Press to set the cleaning interval.
• Depending on the auto cleaning type selected in the Step 5, the
setting value differs.
For PAGE
: 1 to 1000 page
For LENGTH : 0.1 to 100.0m (in 0.1m increment)
For TIME
: 10 to 120min (in 10min increment)
7
Press the key.
8
Press to set the cleaning type.
Set Value : NORMAL/ SOFT/HARD
9
Press the key.
10
Press the key several times to end the setting.
• Depending on the state of the heads, etc., the image quality deterioration may not be improved even
with this function performed.In this case, contact our service office or the distributor in your region.
FUNCT I ON
SE TUP
[ ENT ]
SE TUP
F EED COMP .
[ ENT ]
AUTO C L EAN I NG
: OF F
AUTO C L EAN I NG
: L ENGTH
I NT ERVA L
= 1 0 . 0m
T YPE
: SOF T
T YPE
: NORMA L