MIMAKI TS500-1800, Руководство по эксплуатации

Страница: 142 / 184

5-8
6
Set the syringe with pressure damper to the ink
port valve.
• Insert the syringe with pressure damper into the ink port
valve and suck out ink of 5cc (at a speed of 3 sec. per cc)
slowly.
7
Discharge ink or purge air.
• The discharged ink or air is pooled in the bottle of the air purge jig.
• Discharge mixed ink or air completely. When it is discharged completely, clear ink (not mixed) is
discharged.
8
Perform the procedures from 5 to 7 on all ports which have to be purged the air.
9
Press key after all procedures are
completed.
10
Terminate air purge by pressing the key.
• Close the port.
• When some port is skipped the air-purge, press
to return to
the step 4.
11
Press .
• Cleaning is performed.
12
Press the key several times to end the setting.
• Do not push the valve part of the syringe with
pressure damper. Otherwise, ink absorption
cannot be performed.
• When discarding ink in the syringe, remove the
syringe part from the tube and then discard it. If
you remove the syringe part, ink in the tube
may run down. Before performing the work, it is
recommended to cover around it with a waste
close etc. to prevent it from stained.
Syringe
Valve part
Tube
A I R PG
COMP L E T ED
[ ENT ]
A I R PG
END <
> RE TRY
* * C L EAN I NG * *
P L EASE WA I T