MIMAKI TS500-1800, Руководство по эксплуатации

Страница: 152 / 184

5-18
Message Cause Solution
Occurrence of a time out error on a
USB device.
• Turn off the main power to the machine and
turn it on after a while.
If the same error message appears again,
contact your local distributor to call for ser-
vice.
An excessive load was applied to the
X motor.
An excessive load was applied to the
Y motor.
An error due to an excessive current
of the X motor was detected.
An error due to an excessive current
of the Y motor was detected.
An error was detected in the take-up
tension bar at media set check when
starting printing.
• Check the media set status, and solve the
problem.
An error was detected in the feeding
tension bar at media set check when
starting printing.
• Check the media set status, and solve the
problem.
An error occurred in the take-up sta-
tus of the take-up unit.
• Check that the media can be taken up to
the take-up unit.
• Check that the paper core taking up the
media does not run idle.
An error occurred in the feeding sta-
tus of the feeding unit.
• Check that the media can be taken up to
the feeding unit.
• Check that the media does not run idle.
The take-up cover opened during
printing.
• Close the take-up cover.
The feeding cover opened during
printing.
• Close the feeding cover.
The take-up limit sensor was detected
during printing. • Lower the tension bar or move it to the wait-
ing position.
The feeding limit sensor was detected
during printing. • Lower the tension bar or move it to the wait-
ing position.
The tension bar is in the upper posi-
tion during printing.
• Lower the tension bar.
The tension bar does not move to the
waiting position at media cutting etc. • Move the tension bar to the waiting posi-
tion.
The tension bar is in the upper posi-
tion during printing.
• Lower the tension bar.
An error occurred in the cutter
encoder.
Turn off the main power to the machine and
turn it on after a while.
If the same error message appears again,
contact your local distributor to call for ser-
vice.
E RROR 3 0 5
U S B T I ME OU T
E RROR 4 0 1
MO T OR X
E RROR 4 0 2
MO T OR Y
E RROR 4 0 3
X C URR E N T
E RROR 4 0 4
Y C URR E N T
E RROR 4 2 3
T A K E - U P T E N S I ON B A R
E RROR 4 2 4
F E E D I NG T E N S I ON B A R
E RROR 4 2 5
T a k e - U P WRONG
E RROR 4 2 6
F e e d i n g WRONG
E RROR 4 2 7
T a k e - U P C o v e r OP E N
E RROR 4 2 8
F e e d i n g C o v e r OP E N
E RROR 4 2 9
T a k e - U P L i m i t D E T E C T
E RROR 4 2 a
F e e d i n g L i m i t D E T E C T
E RROR 4 2 b
T a k e - U P B a r S h e l t e r .
E RROR 4 2 b
F e e d i n g B a r S h e l t e r
E RROR 4 4 7
CU T T E R E NCOD E R E R R