MIL'S ANTIGUA S127, Инструкции по запуску и обслуживанию

Страница: 39 / 48

ANTIGUA S27 / S52 / S127 / S162 / S252 / S327 EV
520978-00 37
EN
Disposal
Staff: Adjuster Mechanic
✓
The vacuum pump is drained and cleaned.
•
Dismantle the vacuum pump and classify the materials.
•
Dispose of the materials properly.
TECHNICAL DATA
Service data
Sound pressure level (at 50 Hz, 80 mbar suction pressure, 1 m distance)
Model S27 S52 S127 S162 S252 S327
Sound pressure level 64 dB(A) 70 dB(A) 70 dB(A) 73 dB(A) 72 dB(A) 69 dB(A)
Suction capacity
The operating data are applicable under the following conditions:
•
Conveyed product: dry air 20°C
•
Operating fluid: water 15°C
•
Compression pressure: 1 013 mbar (atmospheric pressure)
Suction capacity compared to suction pressure (10 % tolerance) at 50 Hz
(m³/h)
33
mbar
40
mbar
60
mbar
80
mbar
120
mbar
200
mbar
400
mbar
900
mbar
S27 5 8.5 13.5 16.5 20 23 24 24
S52 20 24 31 35 40 43 45 45
S127 36.5 46 59.5 66.5 73 79 82.5 79
S162 80 90 110 121 133 142 145 142
S252 107 125 150 165 180 190 192 184
S327 130 155 195 222 245 255 255 245
Suction capacity compared to suction pressure (10 % tolerance) at 60 Hz
(m³/h)
33
mbar
40
mbar
60
mbar
80
mbar
120
mbar
200
mbar
400
mbar
900
mbar
S27 5 9.5 19 23.5 28 32 34 31
S52 26 32 41.5 46.5 53 57 58 54
S127 44 56 77 86 93 99 102 94
S162 95 110 141 156 168 174 176 172
S252 120 145 184 205 220 230 235 225
S327 150 180 240 270 295 315 325 300
Electrical data
The electrical data is shown on the nameplate.
The operating data are applicable under the following conditions:
• Conveyed product: dry air 20°C
• Operating fluid : water 15°C
• Compression pressure: 1 013 mbar (atmospheric pressure)
Power requirement compared to suction pressure (10 % tolerance) at 50 Hz
(kW)
33
mbar
40
mbar
60
mbar
80
mbar
120
mbar
200
mbar
400
mbar
900
mbar
S27 0.6 0.6 0.65 0.7 0.75 0.82 0.85 0.55
S52 1.0 1.05 1.2 1.25 1.45 1.6 1.65 1.1
S127 2.2 2.2 2.45 2.55 2.8 3.0 3.1 2.25
S162 3.45 3.45 3.6 3.8 4.0 4.3 4.4 3.7
S252 4.2 4.2 4.4 4.6 5.0 5.4 5.6 4.8
S327 5.0 5.2 5.5 6.1 6.6 7.2 7.2 5.3
Power requirement compared to suction pressure (10 % tolerance) at 60 Hz
(kW)
33
mbar
40
mbar
60
mbar
80
mbar
120
mbar
200
mbar
400
mbar
900
mbar
S27 0.92 0.92 1.0 1.05 1.15 1.22 1.22 0.9
S52 1.55 1.6 1.75 1.85 2.0 2.2 2.3 1.8
S127 3.5 3.6 3.85 4.0 4.2 4.4 4.6 3.7
S162 4.2 4.3 4.6 4.8 5.1 5.5 5.7 4.8
S252 5.7 5.8 6.1 6.4 6.8 7.4 7.8 6.8
S327 7.8 7.9 8.4 8.9 9.5 10.2 10.5 7.5
Drive
Start frequency
≤
10 1/h
If the start and stop intervals are evenly distributed
Models S27 S52 S127 S162 S252 S327
At 50 Hz 2 900 1/min 1450 1/min
At 60 Hz 3 500 1/min 1 750 1/min