15
1.8
Setting the date and time
Press the keys
[Mode]
[1] [2]
in succession.
Confirm your selection by pressing
[Enter]
.
The display now shows:
The date and time are entered in the following sequence:
year, month, day,
e.g.: July 14, 2006 =
[0] [6] [0] [7] [1] [4]
hours, minutes,
e.g.: 3.07pm =
[1] [5] [0] [7]
.
Confirm your selection by pressing
[Enter]
.
Note
When you confirm the entry by pressing
[Enter]
the seconds
are automatically set to zero.
Pressing the
[Esc]
key takes you back to the method-
selection mode.
1.9
Time and date display
Press the
[Time]
key.
The display now shows the current time and date.
The unit returns to the previous routine after approx.
15 seconds
or when you press the
[Enter]
key.
1.10
Automatic switch-off
The Spectroquant® Multy switches off automatically 20 minutes
after the last time a key was pressed. In the last 30 seconds before
it switches off, the unit emits an acoustic signal. During
these 30 seconds you can press a key to prevent the unit from
switching off automatically. The automatic switch-off function is
inactive while the unit is performing operations (running countdown,
printing). After the operation in question has ended, the 20-minute
waiting time before the automatic switch-off function starts run-
ning anew.
<Clock>
yy-mm-dd
hh:mm
__-__-__
__:__
en