12
1.5
Overview of the mode menu
Mode No. Mode function
Brief description
Section
10 Language
Setting
the
language
1.6
11
Key-beep
Activating the acoustic key-acknowledgment tone
3.3.1
12
Clock
Setting the date and time
1.8
13
Countdown
Activating/deactivating the countdown for reaction times
3.3.3
14
Signal-beep
Activating/deactivating the acoustic signal at the end of a measurement 3.3.2
20
Printing all saved measurement results
5.3.2
21
Print, date
Printing measurement results from a defined date range
5.3.3
22
Print, code No.
Printing measurement results from a defined code-No. range
5.3.4
1.4
Starting the colorimeter
the first time
Switch on the colorimeter by pressing the
[On/Off]
button.
The unit runs an electronic self-check test.
The display then shows:
Pressing the
[Enter]
key takes the colorimeter to method
selection.
Any data already saved in the unit must be deleted (mode 34,
see chapter 1.7,
"Delete data"
), the user-method system must
be initialized (mode 69, see section 5.6.5,
"Initializing the
user-method system (concentration and polynomials)"
), and
the date and time should be reset. (See below for details.)
The Spectroquant® Multy is supplied with English preset as the
standard language setting. Before making the first measurement
you should therefore reset the unit to the language of your
choice. To do this go from the method list and change to the
mode menu by pressing the
[Mode]
key.
The display shows:
After a short time the selection list appears:
Please initialize
the storagesystem
with MODE 34
MODE Menu
cancel: ESC
>> 10:Language
11:Key-beep
12:Clock
...
...
...
...
en
