Miller Auto-Axcess 300 CE, Руководство пользователя

Страница: 51 / 76

OM-231185 Page 45
1 Wire Feed Module PC6
Diagnostic LEDs are visible inside
unit, located on PC6 mounted on
the top tray assembly.
Refer to Section 9-7 for information
on diagnostic LEDs.
Reinstall top cover after checking
diagnostic LEDs.
2
Dip Switch S1
Dip switches are used to identify
each circuit board on the internal
network. Dip switch settings are
different for each circuit board. For
proper operation, do not change dip
settings from those shown.
9-6. Wire Feed Module PC6 Diagnostic LEDs And Dip Switch Settings
217 333-B / 804 756-B
2
1
LED1 LED2
LED3
LED4
9-7. Diagnostic LEDs On Wire Feed Module PC6
LED Status Diagnosis
1 On Ind15 volts DC is present on wire feed module PC6.
Off Ind15 volts DC is not present on wire feed module PC6.
2 On Ind5 volts DC is present on wire feed module PC6.
Off Ind5 volts DC is not present on wire feed module PC6.
3,4 On See Network Status Table in Section 9-12.
Off See Network Status Table in Section 9-12.