Mikrotron EoSens 12CXP+, Справочное руководство

Страница: 72 / 88

Analog Control
MIKROTRON GmbH 11 - 2
Introduction
Black level defines the brightness in the darkest part of the image.
Possible black level settings are values between 0 and 255. If the set-
ting is correct, the sensor will deliver the pixel value 0 for a com-
pletely black image. If it is too high, the sensor will deliver a pixel
value greater than 0 for black which means a shade of gray. If the
value is too small, the sensor will deliver a pixel value of 0 for gray
shades.
Gain is used to increase the brightness of the image. The available
range depends on the camera connected. If you increase the gain, all
pixel values of the image will be increased which means, the whole
image becomes brighter. Unfortunately, noise will increase too.
BlackLevel
The black level value defines the brightness in the darkest part of an
image. An optimal setting means, the pixel value 0 is delivered for a
completely black image. If it is too high, it will deliver a pixel value
greater than 0 (which is reserved for a shade of gray). It it is too small,
it will deliver a pixel value of 0 for a shade of gray. sensor’s
Name Access
Length
[Bytes]
Interface Page
BlackLevel R/W 4 Integer 11-2
Digital Gain R/W 4 Float 11-3
ColumnGain R/W 4 Integer 11-3
Access
read/write
Type
enumeration
In
0 to 255
Out
current black level value
Remark
can be incremented by 1