Mikrotron EoSens 12CXP+, Справочное руководство

Страница: 21 / 88

The 12CXP+ Camera
MIKROTRON GmbH 3 - 5
Connecting a Frame Grabber
At the time being, the CoaXPress standard describes four connections
for data transmission between camera and frame grabber. The trans-
mission speed of a 12CXP+ camera can either be set to 3.125, 5 or
6.25 Gbit/s. The possible cable length depends on the cable type
used, its quality, and the selected transmission speed. These values
will only be reached if the signal quality meets the requirements of
the CXP-1.1 specification.
Tip: As the maximal cable
length also depends on the
quality of the cables, we
recommend to buy best
quality e.g. CXP cables from
MIKROTRON.
In order to connect a 12CXP+ camera with a frame grabber you can
use any CoaXPress 1.1 compatible cable with a DIN connector.
MIKROTRON offers cables with the following connectors.
• DIN

DIN
(cable KKRDDINDINxx/6Gx4)
• DIN

BNC
(cable KKRDDINBNCxx/6Gx4)
For more information see " Optional Accessories " on page 2 -4.
Note Please, carefully connect and release the socket with the
DIN1.1/2.3 connector. Connect them precisely to avoid
deformation of the connectors or other damages!
If connecting a frame grabber via DIN

BNC, keep the order from
left to right when connecting one, two, or four BNC connectors.
Tip: Pin 1 of the DIN connec ‐
tor always has to be con ‐
nected.
If you look at the back of the camera, the left DIN connector is the
master connector number 1 (marked by a triangle). Connect it with
channel one of the frame grabber (please, read the frame grabber
documentation).
CXP ‐ Type Transmission speed
Max. cable length
RG59 style
CXP-3 3.125 Gbit/s up to 100 m
1
1. All lines have to be of the same length.
CXP-6 6.25 Gbit/s up to 40 m
1
4x CXP-6 4 x 6.25 Gbit/s = 25 Gbit/s up to 40 m
1