Mikrotron EoSens 12CXP+, Справочное руководство

Страница: 38 / 88

Acquisition Control
MIKROTRON GmbH 5 - 6
TriggerActivation
Tip: If AnyEdge is selected, a
f i x e d e x p o s u r e t i m e
(ExposureMode = Timed)
has to be set.
This feature defines the activation mode for a trigger signal defined in
TriggerSelector.
ExposureMode
This feature sets the operation mode of the shutter. It defines how
long a picture will be exposed if TriggerMode is activated.
Access
read / write
Type
enumeration
In
RisingEdge
Falling Edge
Any Edge
camera will start to acquire frames on the arrival
of a CXP 'trigger rising edge' trigger packet; this
activator expects a subsequent 'trigger falling
edge' trigger packet to finish the trigger
sequence
camera will start to acquire frames on the arrival
of a CXP 'trigger falling edge' trigger packet; this
activator expects a subsequent 'trigger rising
edge' trigger packet to finish the trigger
sequence
camera will start to acquire frames on the arrival
of a CXP 'trigger falling edge' as well as a 'trigger
rising edge' trigger packet
Out
selected activator
Remark
Using the activator AnyEdge doubles the maximal trigger fre-
quency.
Access
read / write
Type
enumeration
In
Timed
Trigger
Width
exposure time is defined in the feature
ExposureTime;
width of the current trigger signal pulse is used
to control the exposure time; if TriggerActivation
is set to RisingEdge, it will be the time the trigger
stays high; if TriggerActivation
is set to Falling
Edge it will last as long as the trigger stays low.
Out
set exposure mode
Remark
ExposureMode is enabled in trigger mode only.
If you choose AnyEdge in TriggerActivator, Timed has to be set.
Timed also has to be set if the TriggerSelector is set to
FrameBurstStart.