Mikrotron EoSens 12CXP+, Справочное руководство

Страница: 34 / 88

Acquisition Control
MIKROTRON GmbH 5 - 2
Acquistion Control
The following commands allow to make settings required for image
acquisition and to control an external trigger. Settings can only be
changed if image acquisition is stopped.
AcquisitionMode
This feature is used to set the device into a certain acquisition mode.
Name Access Length [Bytes] Register Interface Page
AcquisitionMode R/W 4 Enumeration 5-2
AcquisitionStart W 4 Command 5-3
AcquisitionStop W 4 Command 5-3
TriggerSelector R/W 4 Enumeration 5-4
TriggerMode R/W 4 Enumeration 5-4
TriggerSource R/W 4 Enumeration 5-5
TriggerActivation R/W 4 Enumeration 5-6
AcquisitionBurstFrameCount R/W 4 Integer 5-3
TriggerSoftware WO 4 Integer 5-5
ExposureMode R/W 4 Enumeration 5-6
ExposureTime R/W 4 Integer 5-7
ExposureTimeMax R 4 Integer 5-7
AcquisitionFrameRate R/W 4 Integer 5-7
AcquisitionFrameRateMax R 4 Integer 5-8
TestImageSelector R/W 4 Enumeration 5-8
Access
read / write
Type
enumeration
In
Continuous
the camera records continuously a sequence of
frames
Out
selected mode
Remark
frame acquisition can be stopped with the feature
AcquisitionStop