manualshive.com logo in svg

Mikrotron EoSens 12CXP+, Справочное руководство

Поделиться
Скачать
Mikrotron EoSens 12CXP+ Скачать руководство пользователя страница 7

Legal Information

MIKROTRON GmbH

 

1 - 2

About This Reference Guide

This reference guide contains helpful information to install and oper-
ate the here described camera. It has been produced with care. Nev-
ertheless, information might be erroneous or incomplete.
MIKROTRON GmbH cannot be held responsible for any problems
resulting from incomplete or erroneous information. 

In case you detect errors or need further information, please inform
us via mail: 

[email protected]

 

or call 

+49 89 7263420

In case you need support, visit: 

www.mikrotron.de/en/services/support.html 

and send your request.

We highly recommend to read this reference guide carefully. 

This reference guide is subject to change without notice.

Tips, Remarks, Notes and Warnings

This reference guide contains tips, remarks, notes, and warnings that are 
helpful and often important in order to avoid data loss or camera damage. 
They are emphasized as follows:

Tip: 

Gives hints.

Remark:  Important infor

‐

mation.

Note:

Information concerning frame quality, timeouts, 
or other...

WARNING!

Important information concerning data loss or 
camera damage.

Содержание EoSens 12CXP+

























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды